Stream Generation Tabs
226
IQS-8500 Series and IQS-8120NGE/8130NGE
IP/UDP/TCP
For
IPv6
:
Displays the
Link-Local IPv6 Address
,
Global IPv6 Address
, and
Default Gateway Address
.
IPv6 Config
button allows to configure the IPv6 addresses. Refer to
for more information.
For both
IPv4
and
IPv6
:
IP Multiplicator:
Allows changing the 7 LSB (Least Significant bit) of
the source IP address as specified in the range. This setting is disabled
by default.
Range
: Select the IP Multiplicator Range. Choices are
1
-
128
and
0
-
127
.
The default setting is
1
-
128
.
UDP/TCP - Port
: Allows the selection of the source port number.
Choices are
0
to
65535
. The default setting is
49184
(public port
number).
Destination
Address
: Enter the destination IP address for the selected stream.
Ping
button: Press
Ping
to automatically start the quick Ping utility for
the stream destination IP address using the Ping parameters from the
on page 504 for more information.
MAC Address Status
: Indicates the resolve MAC address status when
the
Resolve MAC Address
check box is selected. See page 221 for the
list of possible status.
Resolve MAC Address
: When enabled, will send a request to the
network to retrieve the MAC address corresponding to the selected
destination IP address. This setting is disabled by default.
UDP/TCP Port
: Allows the selection of the destination port number.
Choices are
0
to
65535
. The default setting is
7 (echo)
.
