manualshive.com logo in svg

EXFO IQS-8120NGE, User Manual

The EXFO IQS-8120NGE is a cutting-edge network testing solution that ensures optimal performance. Users can easily access the comprehensive User Manual for this product for free download from our website. This manual provides detailed instructions and troubleshooting tips to maximize the efficiency of the EXFO IQS-8120NGE.

Share
Download
background image

Index

Ethernet and Fibre Channel Application

527

TCP Throughput Analysis ..................... 357
TCP Throughput Configuration............ 353
Test Logger.......................................... 131
Test Summary...................................... 121
Throughput ......................................... 304
Trace Route Configuration................... 401
Traffic Filter ......................................... 177
Traffic Filter Cfg (Advanced Traffic Filtering)

182

Traffic Filter Stats (Advanced Traffic Filter-

ing)....................................... 184

Traffic Scan.......................................... 417
WIS OH RX........................................... 250
WIS RX................................................. 247
WIS TX ................................................. 243

tab configuration ........................................ 57
tab name..................................................... 58
tabs ....................................................... 38, 40
TCP............................................................ 333
TCP Checksum ........................................... 172
TCP Configuration ..................................... 501
TCP Connection Configuration .................. 354
TCP Connection Status .............................. 355
TCP Connection Status, TCP Session

--.......................................................... 355
Closed.................................................. 355
Closing................................................. 355
Established .......................................... 355
In Progress........................................... 355
Remote IP not found ........................... 355
Waiting................................................ 355

TCP Mode.................................................. 354
TCP Port .................................................... 226
TCP Statistics ............................................. 358
TCP Throughput ........................................ 113
TCP Throughput Analysis........................... 357
TCP Throughput Configuration ......... 353, 356
TCP Throughput Statistics ......................... 357
TCP Throughput tabs................................. 353
technical specifications.............................. 455
technical support ...................................... 448
temperature for storage............................ 443

termination mode ..................................... 385
Test...................................................... 71, 129
test case report............................................ 53
test configuration...................................... 124
Test controls ................................................ 45
Test global status ........................................ 44
test granularity .......................................... 314
Test Name ................................................. 124
Test Pattern ............................................... 254
test period ................................................. 361
Test Procedure

Enable Test........................................... 302

test report ................................................... 50
test setup .............................................. 67, 68
Test State

-- .................................. 307, 311, 315, 320
Aborted ....................... 307, 311, 315, 320
Completed ................... 307, 311, 315, 320
In Progress ................... 307, 311, 315, 320

Test Status................................................. 122
test time .................................... 305, 314, 318
test time display mode .............................. 369
Through Mode........................................... 103
Throughput .. 85, 90, 169, 181, 185, 304, 357, 

503

Bandwidth ................................... 181, 185
Frame Rate................................... 181, 185
Utilization .................................... 181, 185

Throughput (RFC 2544) ............................. 428
throughput result ...................................... 308
time..................................... 47, 132, 400, 404
time format ............................................... 368
time options .............................................. 368
time to live ........................................ 397, 505
time zone .................................................. 368
timeout ............. 396, 401, 407, 409, 504, 505
Timeout during execution.......................... 343
Timer Configuration .................................. 126
Tools tabs .................................................. 391
top page...................................................... 58
Topology ............................... 90, 96, 103, 116
TOS............................................................ 503

Summary of Contents for IQS-8120NGE



































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IQS-8120NGE

Parker 6513 Technical Manual preview
6513
Brand: Parker Pages: 54
Camozzi 50 Series Mounting Instructions preview
50 Series
Brand: Camozzi Pages: 2
Oktober 7 Operation Manual preview
7
Brand: Oktober Pages: 22
Raymarine i70 Installation & Operation Instructions preview
i70
Brand: Raymarine Pages: 90
Parr Instrument 4560 Operating Instructions Manual preview
4560
Brand: Parr Instrument Pages: 24
JBL 7130 Installation And Service Manual preview
7130
Brand: JBL Pages: 15
Warehouse-lighting LTR Series Installation Instructions preview
LTR Series
Brand: Warehouse-lighting Pages: 3
Eagle Group SHT Series Operation Manual preview
SHT Series
Brand: Eagle Group Pages: 8
E2S A112N Installation Instructions preview
A112N
Brand: E2S Pages: 5
JBL EON15 Introduction And General Information preview
EON15
Brand: JBL Pages: 38
JBSYSTEMS Light FALCON Operation Manual preview
FALCON
Brand: JBSYSTEMS Light Pages: 32
JBM 53724 Manual preview
53724
Brand: JBM Pages: 12
Nederman NEX S User Manual preview
NEX S
Brand: Nederman Pages: 89
Nederman MagnaTrack ST User Manual preview
MagnaTrack ST
Brand: Nederman Pages: 71
Nederman 30S Series User Manual preview
30S Series
Brand: Nederman Pages: 131
X-Cite TURBO Quick Start Manual preview
TURBO
Brand: X-Cite Pages: 2
Quincy QR-25 Series Manual preview
QR-25 Series
Brand: Quincy Pages: 31
Quidel Lyme FIA Sofia 2 User Manual preview
Lyme FIA Sofia 2
Brand: Quidel Pages: 49

Brands by name

Popular brands

Load more brands