Creating and Starting a Test Case
Ethernet and Fibre Channel Application
79
EtherSAM (Y.1564) Test Case
6.
Services must be enabled before starting the test. For enabling Services
and for additional configuration parameters, refer to
7.
Press the
Start
button to start the test.
At least one of the EtherSAM (Y.1564) sub tests (
Service Configuration
Test
or
Service Performance Test
) has to be enabled to start the test.
The sub-tests that are enabled will be performed following this order:
Service Configuration Test
and
Service Performance Test
.
8.
For additional results, refer to
