Running DSL/IP Tests and Viewing Results
G.fast/VDSL2/ADSL2+ Multi-play Test Set
115
Data Tests Summary
Speedtest by Ookla
1
The
Throughput Test
tab (GVXAA and GVXAB
models only) displays the
Speedtest by Ookla Test
Status
and the
Download
/
Upload
speed
results,
along with the
Ping
(reaction time in ms) value to the
nearest server. Other parameters displayed are the
following:
Test Status
displays a real-time condition of the
test or an error message.
Host
is the URL or IP address of the nearest Ookla
server based on the lowest
Ping
.
Location
is the city and province/state in which
the
Host
server resides.
Country
is the country the
Location
is in.
Sponsor
is the name of the testing
Host
server.
Test Type
displays which test was run. Here you can switch to the
iPerf3
Speed Test
, configure the parameters (except for
Auto Test
),
and run the test.
Ookla Server
displays the server used to run the test.
Automatic
runs
the Ookla test with the lowest latency server. You can select a specific
Ookla server from the list and rerun the test.
Begin Test
button allows you to run a new test.
If you selected
Yes
for the
Show Privacy Statement
in the
Test Setup
, the
following note is displayed prior to the test.
1. Ookla is a third party provider. The Ookla Speedtest Powered technology involves Ookla owned and/or controlled
servers that may or may not be within your network. Ookla retains the right to aggregate test results and to monetize
aggregated results as they see fit.
