Setting Up the MAX-630G
26
MAX-630G
Battery Info
Battery Info
You can set your unit to automatically switch to suspend mode
independently for the battery or DC power modes. This is useful for
example if you want to save battery power but do not want to be hindered
by unwanted switches between modes when using DC power.
Power off completely shuts down the unit’s
power.
Power suspend puts the unit in sleep mode; you
can wake up the system by pressing
.
Note:
If you hold down
for 12 seconds or more, the
MaxTester may reset the date and time to incorrect
values. Once the unit is powered back on, an
Invalid
Date and Time
dialogue box will pop up displaying
The unit date and time are probably invalid.
(1/1/2006 12:00:25 PM)
. Please update the date and
time in
System Settings
/
Date and Time
to ensure the
delivery of all the functionalities the unit has to offer.
DC IN
/
BATTERY Idle timeout
allows you to set the time duration for
the unit to idle (no keys pressed or test being run) before turning off
the LCD.
DC IN
/
BATTERY suspend timeout
allows you to set the time duration
for the unit to enter sleep mode.
Note:
Setting the
DC IN suspend timeout
to the lowest value and not to
Never
ensures the unit enters suspend mode while the charger is connected.
Battery charging time is quickest when the unit is in suspend mode.
