Setting Up DSL/IP Tests
62
MAX-630G
Test Setup
IPTV Test Setup
IPTV test supports STB (set-top box) emulation mode
over xDSL and Ethernet interfaces enabling the
MaxTester to join and leave multicast IPTV streams.
The following parameters can be configured from the
Test Setup
tab:
Display Mode
is either the
Channel Name
or
#
used for displaying channel information in the
result pages.
IGMP Version
is a value of either
2
or
3
used to
send IGMP join/leave messages.
Note:
If you change the
IGMP Version
from the default of
2
to
3
, you must reboot your unit.
Max TS Packet Loss Ratio
is an editable percentage, ranging from 1 to
50, used to qualify if the IPTV stream is stable.
Max ZAP Time
is an editable value ranging from 0 to 10,000 that
measures the channel switch time in ms.
Channel List Setup
button accesses the page to configure parameters
for channel analysis.
Auto IPTV Test Setup
button (only available In Auto Test Setup)
accesses the setup page to automatically run an IPTV test.
