Setting Up DSL/IP Tests
66
MAX-630G
Test Setup
On-screen function buttons:
Add/Insert
is available only when a blank entry is highlighted.
When the button is pressed, the first available channel from the
alias
Channel List
is automatically added to this list of channels.
Upon highlighting another blank entry, the next channel from the
alias table is added, and so on.
Delete
removes the selected channel from the list.
You can
Enable
either one or both, but you cannot
Disable
both of them at
same time. If both tests are enabled,
Join/leave Test
runs first.
To configure test setup values:
1.
Press the up/down arrow keys to select the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4.
Press
to confirm the value.
