EXFO MAX-635G User Manual Download

Page: 113 / 451

Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set

103

Reading Saved Copper Test

Results

Result Manager

You can view,

Upload

Export

, and

Delete

any of your

saved results with the Copper and
G.fast/VDSL2/ADSL2+ Multi-play Test Set, by
highlighting the

Result Manager

icon from the

Copper Main

pane and pressing

Results Summary

The

Results Summary

page allows you to select a

File Name

and view the results of files previously

saved. The page lists all saved result files by test date
and time. The format of

Test Date Time

is per the

selection in

System Settings

. Result files can be

loaded from either the

MT internal memory

or a

USB

To open previously saved test results:
1.

Press the left/right arrow keys to highlight the
desired

Storage Location

Press

to display the list and select the value.

Press the down arrow key to highlight the list box and press

open the list.

In the list, press the up/down arrows to select the test results file.

Press

to open the result file.

Summary of Contents for MAX-635G




































































































































































































































































































































































































































































Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands

EXFO MAX-635G, User Manual

Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands