EXFO MAX-635G User Manual Download

Page: 283 / 451

TDR

Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set

273

Load Trace

Load Trace

The

Load Trace

function allows you to load a

saved trace. The tab opens a page listing
previously saved TDR tests by

File Name

and

when the test was saved, that can be used as the
trace files to be loaded. A trace may be loaded:



Prior to starting the TDR test.



During the TDR test, while it is running.



After the TDR test has been stopped.

Traces may be loaded from either

MT internal

memory

USB

To load a previously saved trace:
1.

Press the left/right arrow keys to highlight the
desired

Storage Location

Press

to display the list and select the value.

Press the down arrow key to highlight the list box and press

open the list.

In the list, press the up/down arrows to select the

File Name

Press

to load the trace.

Summary of Contents for MAX-635G




































































































































































































































































































































































































































































Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands

EXFO MAX-635G, User Manual

Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands