EXFO MAX-635G User Manual Download

Page: 315 / 451

Copper Auto Tests

Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set

305

User Auto Test



Load Coils

detects the presence of load coils in the line.



TDR

characterizes and locates faults in cables under test.



DRP

(Data Rate Prediction) is a software option. When enabled, the

prediction calculation is based on the PSD noise and wideband (WB)
attenuation measurement results up to 35 MHz. Ensure

Attenuation

and

WB PSD Noise

tests are selected for

DRP

to function.

It is recommended to run the

DRP

test on open lines only

(non-terminated). For FED support, the FED state for both

Attenuation

and

WB PSD Noise

must be set to

Open 0



Return Loss

measures the loss of power in the

Sweep

frequency

returned/reflected by a discontinuity in a transmission line.

To select the tests:
1.

Press the up/down arrow keys to scroll through all the tests and
highlight the desired parameter.

Press the left/right arrow keys to view and select the options.

Press

on a value to open a list box of options.

Press

to confirm the value.

Press

to confirm and close your selections.

Summary of Contents for MAX-635G




































































































































































































































































































































































































































































Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands

EXFO MAX-635G, User Manual

Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands