EXFO MAX-635G User Manual Download

Page: 380 / 451

Setting Up DSL/IP Tests

370

MAX-635G

Setup

Delete Phone Book

The

Delete Phone Book

page allows you to delete a

phone book

The page lists phone book files stored at

a particular location and displays the

Loaded File

name and date of the last phone book loaded.



The

Storage Location

lists the location where the

phone book file is stored:



MT internal memory



USB



Entry

displays the number of the phone book(s).



File Name

lists the phone book file name(s).



Delete

button deletes the selected phone book.

To delete a phone book:
1.

Select the

Storage Location

using the left/right arrow keys.

Press

to display the list of options.

Press the up/down arrow keys to select the entry to be removed.

Press the

Delete

button to remove the selected entry from the list.

Summary of Contents for MAX-635G




































































































































































































































































































































































































































































Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands

EXFO MAX-635G, User Manual

Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands