EXFO MAX-635G User Manual Download

Page: 386 / 451

Running DSL/IP Tests and Viewing Results

376

MAX-635G

WAN Status



WAN IPv6

parameter replaces the IPv4

Assigned IP

, when

IPv6

(DHCP)

is set as the

Access Mode

Connection Setup

, because

there are 2 assigned IPv6 addresses: the global one (WAN) and the
local one (Link-Local).



Link-Local IPv6

is only displayed when

IPv6 (DHCP)

is set as the

Access Mode

, and is the assigned local IPv6 address.



Gateway

is the IP address of the default gateway.



Subnet Mask

is the network address used to identify if the IP address is

within the same WAN.



DNS1

is the address of the primary domain name server to be used by

the unit.



DNS2

is the address of the secondary domain name server to be used

by the unit.



VPI (ATM mode only)

is the virtual path identifier value, not available

in PTM mode.



VCI (ATM mode only)

is the virtual circuit identifier value, not available

in PTM mode.



VLAN ID

is a virtual local area network (VLAN) tag ranging from

0 through 4094. The entry is available only when

VLAN Support

Enable



Test

(for

Manual Test

only) allows you to select which triple play test

you want to run or results to view, along with their respective tabs:



Data Test

LAN Status

and

Data Tests Summary



IPTV Test

Join Leave

and

IPTV Summary



VoIP Test

VoIP Call

and

VoIP Summary

The WAN

info reflects the state of currently selected test.

Summary of Contents for MAX-635G




































































































































































































































































































































































































































































Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands

EXFO MAX-635G, User Manual

Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands