EXFO MAX-635G User Manual Download

Page: 419 / 451

Saving, Reading, and Managing DSL/IP Test Results

Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set

409

Saving Results



Uploaded

status column displays a successful, failed, or no upload for

each file.



Upload

button transfers the selected files to the designated location.



Delete

button removes selected XML files from the internal memory.

Note:

For

Auto Test

, if you have enabled the

Web Browser

, wait for the browser

test to start, and then exit the browser to upload files. Alternately, wait for
files to complete uploading before pressing any keys.

To upload previously saved results:
1.

Press the left/right arrow keys to highlight the desired

Upload

Location

Press

to display the list and select the value.

Press the down arrow key and select either

None

All

files.

None

, press the down arrow key to highlight the list box and press

to open the list.

In the list, press the up/down arrows to select the desired files.

Press

to come out of the list.

Press the down arrow key to highlight either

Upload

Delete

and

press

Summary of Contents for MAX-635G




































































































































































































































































































































































































































































Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands

EXFO MAX-635G, User Manual

Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands