EXFO MAX-635G User Manual Download

Page: 420 / 451

Saving, Reading, and Managing DSL/IP Test Results

410

MAX-635G

Managing Results

Managing Results

You can view,

Upload

Export

, and

Delete

any of your

saved results with the MAX-635G by highlighting the

Result Manager

icon from the

DSL Main

pane and

pressing

Read Results

The

Result

page allows you to select a

File Name

and

view the results of files previously saved. The page
lists all saved result files by test date and time. The
format of

Test Date Time

is per the selection in

System Settings

. Result files can be loaded from

either the

MT internal memory

or a

USB

To open previously saved test results:
1.

Press the left/right arrow keys to highlight the
desired parameter.

Press

to display the list or select the value.

Press the down arrow key to highlight the list box and press

open the list.

In the list, press the up/down arrows to select the test results file.

Press

to open the result file.

Summary of Contents for MAX-635G




































































































































































































































































































































































































































































Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands

EXFO MAX-635G, User Manual

Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands