EXFO MAX-635G User Manual Download

Page: 423 / 451

Saving, Reading, and Managing DSL/IP Test Results

Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set

413

Managing Results

Delete

The

Delete

page allows you to delete a selected

File

Name

All

selected result files previously saved in

the

MT internal memory

only.



Storage Location

is the

MT internal memory



Select Files

is either

None

All

None

removes

all check marks allowing you to select one or
more files, or

All



Delete

button removes the selected files.

To delete previously saved test results:
1.

Press the left/right arrow keys

to select either

None

All

files.

None

, press the down arrow key to highlight the list box and press

to open the list.

In the list, press the up/down arrows to select the desired files.

Press

to come out of the list.

Press the down arrow key to press the

Delete

button.

Press

Delete

to confirm your selection or

Cancel

to abort the

operation.

Summary of Contents for MAX-635G




































































































































































































































































































































































































































































Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands

EXFO MAX-635G, User Manual

Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands