EXFO MAX-635G User Manual Download

Page: 68 / 451

Setting Up Copper Tests

MAX-635G

Test Configuration

Auto Test Profile Details

The profile details

Auto Test

main menu allows you to

view the test threshold and parameters of the
following tests:



POTS Auto Test



User Auto Test

To navigate between the test profiles:
1.

Press the up/down left/right arrow keys on the
keypad to select an icon.

Press

to confirm your selection.

Delete Profile

Delete Profile

lists all profiles found on the internal

memory except the default profile, which cannot be
removed.

Selected Profile

displays the profile name in use.

To delete a profile:
1.

Press the up/down arrow keys to highlight the
entry to be removed and press

Press the

Delete

function key to remove the entry

from the unit.

Press

to cancel your selection, remove any display message, and go

back without impacting any profiles.

Summary of Contents for MAX-635G




































































































































































































































































































































































































































































Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands

EXFO MAX-635G, User Manual

Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands