EXFO MAX-635G User Manual Download

Page: 69 / 451

Setting Up Copper Tests

Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set

Setup

Setup

The

Setup

function allows you to set up parameters common to all tests.

To access the Setup function:
1.

On the

Home

pane, highlight

Copper Test

, then press

From the

Copper Main

page select

Setup

and press

Setup

presents a menu of items to setup copper tests.



Phone Book

includes pages to setup and save

groups of phone numbers.



Cable Book

includes pages to select, add, clone,

and delete a cable, as well as modify its details.



Application Settings

include the following pages:

General

Standard

Identification

File Name

and

Buzzer

. Current settings are kept in memory

and are independent of the profiles.



Factory Default

allows you to revert the

Phone

Book

and/or

Application Settings

to the factory default values.



Test Lead Compensation

overwrites the current test lead

characteristics to start resistance and capacitance compensation
based on the cable temperature of the test lead.

To navigate between the setup icons:
1.

Press the up/down left/right arrow keys on the keypad to select an
icon.

Press

to confirm your selection.

Summary of Contents for MAX-635G




































































































































































































































































































































































































































































Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands

EXFO MAX-635G, User Manual

Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands