EXFO MAX-635G User Manual Download

Page: 75 / 451

Setting Up Copper Tests

Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set

Phone Book

Delete Group

The

Delete Group

page allows you to delete a group

entry from the

Phone Book.

The page lists all entries

Group ID

Group # in Use

displays the group number in use.

To delete a group entry:
1.

Press the up/down arrow keys to select the entry
to be removed.

Press the

Delete

function key to remove the

selected entry from the

Phone Book

. If you try to

delete a cable in use, a warning message pops-up
and changes the

Group # in Use

to Group 1 by default.

Press

to cancel your selection, remove any display message, and go

back without impacting the

Phone Book

Summary of Contents for MAX-635G




































































































































































































































































































































































































































































Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands

EXFO MAX-635G, User Manual

Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands