EXFO MAX-635G User Manual Download

Page: 85 / 451

Setting Up Copper Tests

Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set

Cable Book



Capacitance T/R to GND/A/B to E

specifies a value for the capacitance

per length to ground constant.



Resistance

specifies a value for the resistance constant of the cable.



Attenuation @ 300 kHz

specifies a value for the reduction in signal

strength or insertion loss of the cable.



VOP

is the velocity of propagation for the cable defined in m/

sec

(meters per microsecond), and as a ratio and percentage of the speed
of light.



Temperature

specifies the temperature of reference at which all cable

parameters have been measured, in either F (Fahrenheit) or C
(Celsius) units. The measurement units are updated based on the

Temperature

settings in

Setup

Application Settings

Standard

To view and modify the cable details:
1.

Press the up/down arrow keys to highlight the desired parameter.

Press the left/right arrow keys to view and select the options.

Press

on a value to open a list box of options and use the navigation

keys to scroll through.

Press

to confirm the value.

Press the

Accept

function key to update the cable details with your

changes.

Summary of Contents for MAX-635G




































































































































































































































































































































































































































































Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands

EXFO MAX-635G, User Manual

Search results

Summary of Contents for MAX-635G

Reviews:

Related manuals for MAX-635G

Brands by name

Popular brands