Multimeter Tests
MaxTester Copper Test
111
Isolation
Result
displays a snapshot of the pass/fail status,
Resistance
and a
Soak Counter
for each selected wire pair. When running the test, the
counter counts to the selected
Soak Time
by the second, for the wire
pair(s) under test.
Test Status
displays the current state of measurement or an error
message.
To select the parameter values:
1.
Press the up/down arrow keys to highlight the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4.
Press
to confirm the value.
Isolation Thresholds
The
Isolation
Threshold Settings
page allows you to
set the
Threshold Resistance
for each pair.
Type
is the threshold limit for each pair: either
Maximum
or
Minimum
.
Enabled
is a flag to use the voltage threshold:
either
Yes
or
No
.
To set threshold values:
1.
Press the up/down arrow keys to highlight the
desired parameter.
2.
Press the left/right arrow keys to view and select
the options.
OR
