SmartR™ Features
132
MAX-610
Pair Detective
Cable Setup
The
Cable Setup
page allows you to set
Cable
Parameters
for the TDR test.
Cable Type
allows you to select a cable entry
(with its associated parameters) from the
current
Cable Book
, to use for testing. The
selection is not saved when leaving the test.
The current Cable Book entry is shown by
default.
Cable Fill
read-only entry is the type of
material the cable is filled with:
Aircore
,
Jelly
,
Pulp
,
5 PR
, or
2 PR
. Setup in the
Cable Book
.
Velocity of Propagation
read-only entry is the
velocity of propagation for the cable as a ratio
of the speed of light. Setup in the
Cable Book
.
Cable Temperature
allows you to change the temperature of the cable
under test in either degree
C
or
F
.
To select the parameter values:
1.
Press the up/down arrow keys to highlight the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4.
Press
to confirm the value.
