Frequency Tests
MaxTester Copper Test
175
VF/AC Balance
Note:
The selected
Standard
in
Setup
/
Application Settings
determines the
name of the frequency test -
ANSI
:
VF Balance
,
ITU
:
AC Balance
.
To select the parameter values:
1.
Press the up/down arrow keys to highlight the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options.
4.
Press
to confirm the value.
VF/AC Balance Active Threshold Settings
The
Threshold Settings
page allows you to set the
Active VF/AC Balance Threshold
values for the test.
VF/AC Balance
sets the active balance threshold.
Type
is the threshold limit: either
Maximum
or
Minimum
.
Enabled
is a flag to use the current threshold:
either
Yes
or
No
.
To set threshold values:
1.
Press the up/down arrow keys to highlight the
desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4.
Press
to confirm the value.
