Copper Auto Tests
MaxTester Copper Test
229
User Auto Test
To select the parameter values:
1.
Press the up/down arrow keys to highlight the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options.
4.
Press
to confirm the value.
Test Selection
The
Test Selection
page allows you to select the test types to include in the
auto test, and set a
Pause
between tests by selecting
ON
or
OFF
. When FED
is
Enabled
on the
FED Setup
page,
Pause
is replaced with
FED State
parameters. All listed tests have a fixed duration (snapshot) and are not
continuous. Graphs are not displayed.
The following tests are available:
Voltage
detects AC RMS and DC voltages in the line.
Current
checks for AC RMS and DC currents in the line.
