Setting Up Copper Tests
68
MAX-610
Application Settings
To select the parameter values:
1.
Press the up/down arrow keys to highlight the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options or the alphanumeric
editor screen and use the navigation keys to scroll through.
4.
Press
to confirm the value.
Test List Setup
The
Test From List Setup
and
Test To List Setup
pages allow you to manage the entries of the list.
However, there are 5 entries by default which cannot
be edited or deleted. These are
DSLAM
,
NID
,
CPE
,
CROSSBOX
, and
FRAME
. When any of these are
selected, the
Delete
and
Accept
buttons are disabled.
A maximum of 20 different entries can be added.
To manage the list:
1.
Press the left/right arrow keys to select the
Previous
/
Next Entry
buttons and press
to
select the previous/next entry.
2.
Press
Page Up
/
Down
function keys to see entries on the previous or
next pages. These keys are disabled if no other pages exist.
3.
Press
Add
function key to add an entry just below the selected entry in
the list.
4.
To edit an entry, press the up/down arrow keys to highlight the selected
test. Press
Accept
function key to confirm the changes. If you press
Previous
/
Next Entry
buttons before the
Accept
function key, the
edited value will be lost.
5.
Press
Delete
function key to delete any entry you have added.
