Setting Up Copper Tests
74
MAX-610
FED Setup
2.
For
Open
, set the FED so that the T-R/A-B wires connected to the
customer side of the FED are open circuited.
3.
For
T-R-G
/
A-B-E Shorted
, set the FED so that T-R-G/A-B-E are all short
circuited (connected to each other) at the customer side of the FED.
Note:
P.U.T
., in the above diagrams, refers to the Pair Under Test.
Remote
is the FED, and
Controller
is the MaxTester.
