Setting Up Copper Tests
MaxTester Copper Test
75
FED Setup
The
FED Setup
tab displays the following parameters:
FED
sets the default
FED States
for the following
tests to
Enabled
or
Disabled
, and is saved as part
of the profile:
Multimeter
Noise
Frequency
Other
When
FED
is
Enabled
and you start a test, the
MaxTester will warn you if the FED battery level is low. Select
OK
to close
the message and run the test.
FED States
are displayed in the
Current Test
line as a numeral on the
right-hand side of the FED icon, for example
. Numerals match the
following states:
0 = FED Open
1 = FED T-R/A-B Shorted
2 = FED Shorted ALL
3 = FED Pass Through/Exchange Connect
4 = FED ID Tone
5 = FED Terminated
6 = FED Crosstalk NEXT
7 = FED Transmit
8 = None
