4
En
gl
is
h
Pairing the speaker to a Bluetooth device
1. Hold in [
] (2) until the LED indicator comes on. The speaker will emit an audible
signal and the LED indicator will flash blue indicating that the speaker is ready to
be paired with another device.
2. Activate Bluetooth on the device to be paired with the speaker.
3. The speaker will appear as
BX210
, Select it and pair it to your device.
4. The LED indicator will transition to a steady blue light, indicating that the device
has been paired.
5. Start playback on the Bluetooth device. The volume level and track can be
changed on either the speaker or on your external device. Other playback settings
can be controlled from the external device.
Connecting a device via the 3.5 mm socket (AUX)
1. Switch the speaker on.
2. Connect a 3.5 mm audio cable between your device and the aux input (9) on
the speaker.
3. Press [
] so that the LED indicator (1) shines a solid green.
4. Start playback on the external device.
5. Adjust the volume level on the speaker or the external device.
Note:
The track can be changed using the buttons on the speaker once the external
device is connected via the 3.5 mm socket.
Charging an external device via the USB port
• Connect an appropriate charger cable between the speaker’s USB port (8)
and the device to be charged. The device will charge regardless of whether
the speaker is on or off.
• Remember that the speaker’s battery will drain quicker when an external device is
being charged via its USB port than when it is strictly playing music via Bluetooth
or its AUX socket.
Care and maintenance
• Clean the speaker using a lightly moistened cloth. Use only mild cleaning agents,
never solvents or corrosive chemicals.
• If the speaker is not to be used for a long time, the battery should be fully charged
on a regular basis (every second month) to prolong its capacity.
