Problems and Symptoms
Possible Cause
Solution
No Output voltage
No Display
Poor battery condition or
battery connection loose
Use new battery or make
proper connections
No output voltage
Overload indication
Excess Load Applied
Reduce the excessive load
from the Exide Inverterz &
reset by ON/OFF Switch
No output voltage.
LCD shows all trip
Thermal shut down
Call the service support. There
is overheat problem in the
system
Fuse Trip
MCB trip
Reset MCB
Mains ON but Not Charging
UPS/ Normal Selection
switch may be in UPS mode
Check Mains voltage at LCD
Display & Selection of Normal
/ UPS mode as per specified
voltage range
Mains ON but Not Charging
Bypass Switch may by in
Bypass Mode
It should be in Manual Mode
while Inverterz is OK
Troubleshooting Guide