15
MSP-35101-V01
Note: - If massage function is on, the filtration can’t be activated.
Press the heating button
to activate water heating and filtering system at the
same time. The green indicator light of filter and red indicator light of heating will
turn on at same time. The pump does not stop heating until the current water
temperature reaches the set temperature; and the heating system will restart after
the current water temperature drops 2°C below the set temperature automatically.
Maximum heating temperature: 40°C (104°F)
Important:
After 150 cumulative hours of filtration operations, an audible alarm will
sound and the LCD display will show the characters CHG, followed by FIL,
to remind you to change or clean the filter. You can hold the filtering button
5 seconds to turn off the buzzing. The filtering system will turn off, you can
press the button to active the filtering system again.
Note :
- With the heating system staring, the filtration system will start working together.
- After turning off the heating system, the filtration system will still work.
- If the massage function is active, the filtration and heating functions can not be
activated.
6.2 Pool cover and security (optional)
After each use, the control panel must be locked and the pool must be coated with its
top cover and it must be attached to the base protector with the safety buckles.
Each safety buckles has a lock system ; closed buckle, the latch in up position locks
the buckle, the latch in down position unlocks the buckle.
The top cover keeps the heat from the water and secures the pool.
6.3. Water maintenance
WARNING
: A bad pool water quality can harm your health.
Depending on the frequency and conditions of use:
- The filter cartridge should be regularly cleaned (150 hours max.).
- The filter cartridge should be replaced every 1 to 2 month.
- The pool water should be changed every 15 to 30 days.
Use a water test kit to control the parameters of the water before using the spa, or at
least once a week. Use disinfection products for the spa. The treatment products
should be used with caution and it is imperative to refer to their instructions.
Damage resulting from improper use of treatment products is not covered by
warranty (overdose, shock treatment, ...).
1. Water balance
The water balance (pH) must be maintain between 7 and 7.4.
2. Water Sanitation
To sanitize the pool water, we suggest using an active oxygen-based
treatment or bromine placed in a floating dispenser. (Dispenser sold
separately).
