16
MSP-35101-V01
7. Maintenance
7.1 Cleaning and replacing filter cartridge
Dirty filter cartridge may contaminate the pool water and cause damage to the
heatingfunction. 1. Unscrew the filter case by turning it counter-clockwise. Take
out the filter cartridge from the case. 2. Rinse off the filter cartridge with a garden
hose. If the filter cartridge remains dirty and discoloured, the filter cartridge should
be replaced. 3. Put back the cleaned filter cartridge into his case and screw it to the
pool.
7.2 Disinfection
Water Sanitation: To sanitize the pool water, we suggest using an active oxygen-
based treatment or bromine placed in a floating dispenser. (Dispenser sold
separately) If water is heavily polluted you should not use pool. Clean pool with with
specialist UV lighting equipment. Seek professional advice and guidance before doing
this.
Attention:
Detergent residues and dissolved solids from bathing suits and chemicals may build
up on the spa walls, Use soap and water to clean the walls and rinse thoroughly with
a garden hose using a direct powerful waterspray
7.3 Drainage and storage
1). Check the stopper on the bottom of the pool and the drain cap.
2). Unscrew the drain cap.
3). Remove the stopper on the bottom of the pool. Completely drain all water from
the spa pool.
4). Once empty, the pool can be cleaned with soap and water.
Storage
5). Press the bubbling button to blow out the water inside the jet holes. Unplug the
pump, remove the filter cartridge from the inner wall of the pool.
6). Use a towel to wipe off the pool, dry 24 hours.
7). Unscrew the valves to deflate the pool.
8). Fold the pool.
It is recommended that store the SPA in its original package in a warm dry place.
