2.
For 34, 42, 54 Inch Decks: Proceed to Step 3.
For 50 Inch Deck:
A.
Remove and retain the existing baffle and its
mounting hardware from the machine.
g299303
Figure 13
B.
Install the new small baffle to the mower deck
at the same location as the previously removed
baffle as shown in Figure 14.
g299302
Figure 14
C.
Rotate the baffle until it makes contact with the
mower deck.
g300212
Figure 15
3.
Tilt the chute and install the pin into the hole on the
mower deck as shown in Figure 16.
g300377
Figure 16
4.
Pivot the chute back and toward the deck so the
chute is flush with the mower deck.
Note:
Ensure that the retaining hook latch on the
chute is lifted so the chute opening mounts flush to
the deck.
5.
On the top of the chute, engage the retaining hook
latch around the pivot rod of the deflector assembly.
6