Operation
Product Overview
Figure 3
1.
Platform
4.
Engine controls
2.
Park brake knob
5.
Fuel cap
3.
Motion control levers
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Controls
Motion Control Levers
The motion control levers, located on each side of the
top console, control the forward and reverse motion
of the machine.
Moving the levers forward or backward turns
the wheel on the same side forward or reverse
respectively. Wheel speed is proportional to the
amount the lever is moved.
Important:
The tines are rotating when the
motion control levers are moved out of the
neutral position.
Figure 4
1.
LH Motion control lever
5.
Forward
2.
RH Motion control lever
6.
Neutral
3.
Front reference bar
7.
Reverse
4.
Front of unit
Choke Control
Located on the control console (black lever) (see
Figure 5).
The choke is used to aid in starting a cold engine.
Moving the choke lever forward will put the choke in
the “ON” position and moving the choke lever to the
rear, to the detent, will put the choke in the “OFF”
17
Summary of Contents for ARX481CKA30000
