Page 5 of 5
109-4291 Rev. A
FIGURE 9
IMPORTANT:
Do not transport FrontRunner tractor
without and approved Exmark front mount
attachment.
Deck Adjusting Screws
Note: The deck has been leveled at the factory, and
should not require any additional adjustment.
1. If deck adjustment is necessary, position mower
on a flat surface.
2. Stop engine, wait for all moving parts to stop,
engage parking brake and remove key.
3. Install the four (4) socket head 5/16”-18 x 1-1/4”
screws, provided in the customer literature pack,
into the deck lift arms (see Figure 10) and level
the deck as outlined in the Operator’s Manual in
Section 4.3.2.
FIGURE 10
4. Return these screws to the customer literature
pack after unit is set-up.
Note: If the screws are left in the rear lift arms they
may interfere with the belt shields when the deck is
folded.