- 26 -
Blade Bolt
Blade
Accelerator
Figure 19
(Units without a Blade Brake Clutch Only)
NOTE:
Be careful to prevent dirt and debris from entering the air duct leading to the
carburetor.
13. Install the air cleaner elements and ensure that they are properly positioned.
14. Securely install the cover with the 2 wing nuts.
4.6 Maintaining the Blade
Always mow with a sharp blade. A sharp blade cuts cleanly and without tearing or
shredding the grass blades.
1. Stop the engine and wait for all moving parts to stop.
2. Disconnect the wire from the spark plug (Fig. 5 & 7).
3. Drain the gasoline from the fuel tank.
4. Tip the lawn mower onto its
right
side (Fig. 18 and 19)
5. Inspect the Blade for sharpness and wear, especially where the flat and the curved
parts meet (Fig. 20A). Because sand and abrasive material can wear away the metal
that connects the flat and curved parts of the blade, check the blade before using the
lawn mower. If you notice a slot or wear (Fig. 20B and 20C), replace the blade.
NOTE
: For the best performance, install a new blade before the cutting season
begins. During the year, file down any small nicks to maintain the cutting edge.
Figure 18
(Blade Brake Clutch Units Only)
Accelerator
Anti-Scalp Cup
Blade Nuts
Blade
G0218
G0233
Figure 20
Sail
Sail
Sail
Flat
Wear
Slot
G0219
Summary of Contents for Metro 21 Series
Page 44: ... 39 NOTES ...
Page 45: ... 40 NOTES ...
Page 46: ... 41 NOTES ...
Page 47: ... 42 SERVICE RECORD Date Description of Work Done Service Done By ...