EXO Visual Inc
+1 833 733 7427 V3.1
www.exovisual.com
3.1.9, Advanced settings:
Input resolution. Default setting is 1920 x 1080(full HD). This will allow all ezPosters to daisy
chain signal to the next one till this full HD is reached.
Normal content display will start from left top position. Horizontal and vertical (X,Y) pixel
shift will change the position of the content displayed on the target ezPoster. The content
can be shifted by dragging the grey block and move its comparative position with the
ezPoster.
By click test mode and select the target color, the ezPoster will display the color selected.
Color temperature default setting is 6500. It can be changed on the slider.
3.1.10, Restore to factory default
By clicking “Retore to factory default”, all setup or operational data will be erased. Network
setting can still be saved by checking its box.
3.2
Control ezPoster from the iPhone.
3.2.1, Download app. “Seesharp ezPoster” from App. store.
Look for the device wifi and connect to the wifi from your phone setup. Enter default wifi
password 123456789.
Tip: If WIFIi password is changed. Use USB A-B cable and laptop software to get control to the
screen. Network settings can be changed from laptop software.
