3002691 CHRP-S UK
The weight of the CHRP-S compact-plate heat exchanger without water appears from the table below.
exodraft product number
Compact-plate heat exchanger
product number
Number of compact-plate
heat exchangers
Weight per heat exchanger
CHRP-S60-1-150I
3200683
1
8,2 kg
CHRP-S80-1-180I
3200684
1
10,5 kg
CHRP-S120-1-225I
3200686
1
14,9 kg
CHRP-S140-1-250I
3200687
1
17,1 kg
CHRP-S100-2-250I
3200685
2
12,7 kg
CHRP-S120-2-300I
3200686
2
14,9 kg
CHRP-S140-2-350I
3200687
2
17,1 kg
CHRP-S120-4-400I
3200686
4
14,9 kg
CHRP-S140-4-500I
3200687
4
17,1 kg
Warning
Do not open the housing without disabling the power supply to the CHRP-S heat exchanger.
6.3 Troubleshooting
Problem
Possible reason
Solution
The supply-side temperature
is low and the difference in
the temperature of the waste
gases before and after the heat
exchanger is too small.
- Air in the water system
- The circulating pump does not work
properly
- The water flow is too weak
- The compact-plate heat exchanger is
dirty
- Vent the system
- Check the operation of the circulating pump
- Check the operability of the control unit
- Mount forward- and backward flow correctly
- Clean the appliance and check the operability of the water
discharge
- The pump runs constantly at too
high a temperature.
- Air in the water system
- The circulating pump does not work
properly
- Too high heat supply
- Vent the system
- Check the operation of the circulating pump
- Check the operability of the control unit
- Check the voltage and the connection of the pump
- A bigger CHRP-S appliance is necessary or the heat supply is to
be reduced
Maintenance and troubleshooting •
15
Summary of Contents for CHRP-S
Page 1: ...UK Waste heat exchanger CHRP S Read and save these instructions ...
Page 17: ...3002691 CHRP S UK 17 ...
Page 18: ...3002691 CHRP S UK 18 ...
Page 19: ...3002691 CHRP S UK 19 ...
