1.7
Service menu
The service menu is only to be operated by qualified staff.
For an overview of the
service menu,
see page 13.
Operation of the
user menus
is described in sections 2, 3 and 4.
Navigation in the service menu
• To activate the service menu, press and hold
OK
for 3 seconds.
• Operation is carried out using the buttons as described in section 1.5 Introduction to the user interface,
page 10.
• The upper display (pos. 10 on page 9) presents the number of the menu, with the set point for this
menu being shown in the lower display (pos. 13 on page 9).
• Menus whose last digit is “0” are exit menus. These are used to navigate one level back.
To do so, press
OK
.
• To activate the editing options for a menu item, press
OK
. The set point will start flashing.
• Confirm and save selection with
OK
.
• To exit the service menu, press
RESET
. This will take you back to the operation screen. Alternatively, you can
navigate back one level at a time if you wish to set multiple menu items.
For examples of how to use the service menu, see 1.7.2 on page 15
The service menu
operation settings
Service menu
3002878-EBC20-UK
12
• Product information
12
• Product information
