3.5
User menu
The user menu provides access to 5 functions:
Menu Function
Range
1
Setting of the chimney fan output for stage 1 (LOW)
35-100%
2
Setting of the chimney fan output for stage 2 (HIGH)
35-100%
3
Setting the pre-purge period for the chimney fan
0-999 s
4
Setting the post-purge period for the chimney fan
0-60 min
5
Displaying current alarm (see alarm overview page 36)
-
When the instructions refer to the menu numbers 1, 2, 3, 4 and 5 it is understood that these numbers refer to the user
menus.
3.5.1
Operating the user menu
Setting up the operating function
Before you can use the EBC20 as a 2-stage speed regulator for
exodraft
chimney fans, you must change the operating
function.
The procedure for setting up the operating function is described in 1.7.2 Changing between the operating functions
(
-
-
), page 15.
Using the buttons
To operate menu items 1–5, use the buttons as follows:
Step
Press...
To...
1
OK
• Activate the user menu
2
and
• Go to the menu item you wish to edit
3
OK
• Edit the menu item selected
4
and
• Adjust the required set point
5
OK
• Confirm and save the required set point
6
RESET
Return to operation screen.
NB: If you do not press
RESET
the EBC20 will automatically
return to the operation screen after 30 seconds
You can always undo an action (that you have not confirmed by pressing
OK
) and return to the operation screen by
pressing
RESET
.
Adjust the set points for user menu items 1–4 as shown in the example on the following page.
Alarms
For alarm handling (menu 5), see page 35.
3002878-EBC20-UK
28
• 2-stage speed regulation