- 19 -
The above message means invalid I/O ports in the EXPCDI line of
CONFIG.SYS has been selected. The legal I/O port numbers are: 1, 2,
and 3.
v
Error: Illegal IRQ number!
The above message means an invalid IRQ number in EXPCDI line of
CONFIG.SYS has been selected. The legal IRQ numbers are 3, 4, 5, 7,
9, 10, 11, 12 and 15.
v
Error: There is no available 4K memory for mapping!
The above message means EXPCDI can't find available 4K memory
between C000:0 to EFFF:0. This error can be corrected by changing the
EMM386 line of CONFIG.SYS to exclude at least 4K memory for
mapping. For example,
DEVICE=C:\DOS\EMM386.EXE
...
X=D000-D3FF
v
Error: The INTEL 82365SL PCMCIA controller is not
detected in your system. You should contact your
dealer to get PCMCIA support software.
The above message means the PCMCIA controller for your system is
not INTEL 82365SL compatible. In this case, you should install PCMCIA
support software which should be supplied by the notebook
manufacturer.
v
CD-ROM Drive is not found!
The above message means EXPCDI.EXE can't find the PCMCIA CD-
ROM drive. Please make sure the CD-ROM drive is properly connected
to the PCMCIA interface card cable.
Error message generated by MSCDEX.EXE:
v
Device driver not found: 'MSCD001'
This means that EXPCDI.EXE is not installed properly or you have
entered a different
/D:
switch in the MSCDEX line of AUTOEXEC.BAT.
The
/D:
switch must be the same as the
/D:
switch in the EXPCDI.EXE
line of CONFIG.SYS.
If the error message displayed is none of the above, please contact your
dealer to obtain customer support.
Summary of Contents for CD-940E
Page 1: ...PCMCIA Portable CD ROM Installation Manual CD 940E...
Page 17: ...12...
