- -
14
In this case, double click on the PCMCIA Controller, and a dialog box
will be displayed as below. Please place a check mark next to the
current configuration of Device usage box, then select OK.
Figure 10
After the PCMCIA 32-Bit Card support is installed, Windows will ask you
to reboot your computer. Then you should refer to the first section titled
“Using CD-ROM Under Windows 95” to configure the CD-421.
If the PCMCIA Socket is not found, then you must add a PCMCIA socket
to your system. Please click on the “Add New Hardware” icon in the
Control Panel folder and select “PCMCIA socket”. Select the
appropriate type of PCMCIA Controller that matches with yours and
follow the on-screen instructions.
