- -
21
TROUBLE SHOOTING
This section explains the most common error messages that
DOS/Windows users may encounter.
After rebooting your computer, the following messages will be displayed
on your screen, which are generated by EXPCDI.EXE and
MSCDEX.EXE.
Configure card to:
I/O Port:170-177, 376-377
IRQ number: 15
Device Name: MSCD001
CD-421 card is present in socket 1
.
.
.
Drive D: = Driver MSCD001 unit 0
If any error occurs or the CD-421 does not work, you should reboot your
computer again. When the system displays 'Starting MS-DOS...', press
the F8 key to make the system executes the CONFIG.SYS and
AUTOEXEC.BAT step by step, so that you can consistently press the ‘Y’
key to see each command's message.
Error messages generated by EXPCDI.EXE:
v
v
Error: CD-421 card is not present!
If the above message appears, it means EXPCDI can't find any CD-421
card in your PCMCIA slots. Make sure the card is inserted firmly.
v
v
Error: Illegal arguments!
For help, type "EXPCDI /?".
The above error message means that there are invalid arguments in the
EXPCDI line of CONFIG.SYS. Please refer to the section titled
“MANUAL INSTALLATION” for the usage of EXPCDI.EXE.
v
v
Error: I/O port and IRQ number must be specified!
The above message means you have not specified the I/O port and IRQ
number argument in the EXPCDI line of CONFIG.SYS.
