background image

EXP COMPUTER, INC.

 EXP MEMORY PRODUCTS.

NON-TRANSFERABLE LIMITED WARRANTY

EXP COMPUTER INC., AND EXP MEMORY PRODUCTS ("EXP") warrants that the Disk Traveler
(“products”) manufactured or distributed by EXP to be free from failures due to defects in materials
or workmanship for a full one year from the date of purchase of the products.

This warranty is void if the product is damaged by abnormal or improper use or by accident, abuse
or if any attempt to repair or modify the product without authorization from EXP. Your sales receipt or
invoice, showing the date of purchase and the name of the authorized reseller, is your proof of the
date of purchase.  During the warranty period, EXP will at its option, replace or repair, at no charge,
the product that in its opinion is defective.

Before you return the failed products, contact EXP.  You will need to obtain a Return Merchandise
Authorization (RMA) number by calling EXP’s Technical Support Department at (516) 496-7629.
The RMA number should be displayed on the outside of the returning package and on the
accompanying packing list.  EXP cannot be held responsible for any package returned without the
RMA number.  You are responsible for packaging, providing proof of the date of purchase and
the shipping cost of the failed product to EXP Computer, Inc.  You are responsible for mailing the
warranty registration card.  The warranty claims may not be honored if there is no corresponding
registration card on file at EXP.

IN NO EVENT WILL EXP BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGE, INCLUDING LOSS OF PROFIT, LOSS OF SAVINGS; OR
ANY OTHER DAMAGES CAUSED BY PRODUCT OR FAILURE OF THE PRODUCT TO
PERFORM.

THIS LIMITATION OF LIABILITY APPLIES EVEN IF EXP HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME SATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION IN INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION
OR LIMITATION MAY NOT APPLY TO YOU.

EXP WEB SITE: 

www.expnet.com

TECHNICAL SUPPORT: 516-496-7629
TECHNICAL SUPPORT E-MAIL: support@expcomputer.com

TABLE OF CONTENTS

INTRODUCTION

1

 SYSTEM REQUIREMENT

 FEATURES

 PACKAGE CONTENTS

 PART NAME AND FUNCTIONS

INTSTALLATION

5

INSTALLATION FOR PARALLEL PORT INTERFACE

 SOFTWARE INSTALLATION FOR WINDOWS 95 AND 98

 SOFTWARE INSTALLATION FOR WINDOWS NT

INSTALLATION FOR PC CARD INTERFACE

 SOFTWARE INSTALLATION FOR WINDOWS 95 AND 98

 SOFTWARE INSTALLATION FOR WINDOWS NT

TROUBLE SHOOTING

17

 PARALLEL PORT INTERFACE

 PC CARD INTERFACE

REMOVE AND RE-INSTALL THE DRIVER

23

 PC CARD INTERFACE

 PARALLEL PORT INTERFACE

APPENDIX

25

 FCC COMPLIANCE STATEMENTS

 MEDIA CONSIDERATION

26

 TIPS

27

Summary of Contents for CRW-740




















Reviews: