EXPERT Standard Series User Manual
185
Unit digit: Current host running status
0: Invalid
1: Valid
Tens digit: Current host running frequency
0: Invalid
1: Valid
Hundred's digit: Reserved
Thousand's digit: Reserved
Fb.06
Communication ratio factor 0.000~ 2.000
1.000
This parameter is used to set the weight coefficient of the frequency instruction
received by this drive from the RS485 interface as a slave, and the actual running
frequency of the localhost is equal to this parameter value multiplied by the value of
frequency set instruction received from the RS485 interface. During linkage control, this
parameter can be used to set the proportion of running frequency of multiple drives.