EXPERT Standard Series User Manual
198
Channel
Channel name
Description of characteristics
According to the setting of
FC.28, the modified frequency
can be stored to FC.27 during
power failure.
2
Terminal UP/DN given
3
Serial port given
4
AI1 analog given
Determined by actual analog
input. See F5.00 for the selection
of
frequency
relationship
characteristic curves.
5
AI2 analog given
6
Terminal PULSE given
7
- AI1 analog given
8
- AI2 analog given
9
- Terminal PULSE given
10
AI1-5
11
AI2-5
12
PULSE-0.5×F5.03
13
Reserved
14
AI3 analog given of expansion card
Determined by actual analog
input. See F5.00 for the selection
of frequency relationship
characteristic curves
When the digital setting 3, and the serial port given are selected, the upper computer
modifies the auxiliary frequency by setting FC.27.
When AI1-5, AI2-5 or PULSE-0.5×F1.03 is selected as the auxiliary frequency given
channel, 5V analog input is used as the center point, 0~5v is used for negative regulation,
and 5~10v is used for positive regulation. As shown in Figure 6-68:
