【
III
】
PRODUCT INSTRUCTION
【
II
】
PRODUCT DESCRIPTION
2) How to provide power for AC appliances with this product?
a. How to provide power for DC12V appliances(such as head lamp, fan) with DC output
of this unit?
1) How to DC output and car port with this product?
Connect the power cable plug of the electrical appliance to the AC outlet of the product,
and press the AC switch . The unit will start providing power to your appliances.
WARNING! The Ac outlets, AC voltage and frequency are different according to different
countries ; please carefully check whether the product specifica�ons are consistent with
the appliance specifica�ons before use, otherwise it can lead to dangerous situa�ons.
Plug your appliances to the DC output port and press the power bu�on
to gain power.
No�ces: Please confirm whether your DC12V appliance support charging with
5.5mm/2.1mm DC header interface (The diameter of the DC Port of the Product is:
5.5mm/2.1mm),otherwise it is unable to connect with the DC output, you can consult the
electrical manufacturer, buy the corresponding adapter and connect with it.
【
Right
】
Note:
The 5.5mm DC output and the car port output voltage is range between
9V~12.6V, DC output voltage drops while ba�ery capacity drops due to chemical
characteris�cs of the ba�ery. If your appliance is not built-in input voltage stabilizing
func�on, it may shutdown when input voltage is too low, please unplug your device
from the unit in �me. And please charge the unit in �me.
※
Handle
AC Outlet(s)
AC Switch
Ba�ery Indicators
AC Indicator
5.5mm/2.1mm DC Output
9-12.6V/10A (15A, 150W Max
)
Ø
6.5mm/3.0mm DC Input :3.5-23Vdc/4.6A max
USB:QC1: 5V/2A,9V/2A(18W,QuickCharge3.0)
Power Switch
Cooling Fan
(DO NOT BLOCK)
ATTENTION! AC Outlets,AC output voltage and frequency will be different according to different countries
or areas. Please refer to the actual product before using.
【Left】
【Left】
※
When the AC port is not in use, turn it off to conserve power.
Protec�on Mode:
Shortcircuit/Overpower Protec�on:
If the DC output is shortcircuited or overpowered(
-
Load(s) surge current>15A, or surge power>150W), the unit will shutdown to protect
itself. Please clear the problem and charge the unit to recover.
Charge 12V kits through DC-Cigare�e
Lighter Adapter
or charge 12V kits via DC to Cigare�e Litghter Connector
5.5mm DC12V for Fan or
LED lights
USB:QC2: 5V/2A,9V/2A(18W,QuickCharge3.0)
USB:QC3: 5V/2A,9V/2A(18W,QuickCharge3.0)
USB C Out: 5V/3A,9V/3A,12V/3A,15V/3A,20V/3A(60W PD3.0)