background image

6

GUARANTEE 

Expleco Limited guarantees this product from defects of materials and workmanship for a 
period of twelve months from date of purchase provided that the product is used in 
accordance with the recommendations set out in this instruction manual and with voltage and 
current limits set out on the motor plate. Expleco Limited will at its own option make good, 
replace the complete machine (or defective component) with the same or similar product, or 
provide credit for any product manufactured or supplied by it, which proves to be defective 
within the limits set out above provided that always no repairs, modifications or alterations to 
the product have been undertaken or attempted, other than by the company or its authorised 
agents. Should the purchaser wish to make a claim under the guarantee, the product should 
be returned pre-paid to the place of purchase. 

To obtain the warranty the purchase receipt must be returned with the machine. This 
guarantee is in addition to and does not take away from any rights available to the consumer 
under the Consumer Guarantees Act. 

A TWELVE MONTH GUARANTEE APPLIES TO THIS PRODUCT FOR DOMESTIC 
AND LIGHT INDUSTRIAL USE ONLY.  (Bars, restaurants, cafes, hotels, motels, 
lodges, charter vessels and other intermittent light industrial sites) 

THE GUARANTEE IS APPLICABLE FROM THE ORIGINAL DATE OF PURCHASE 

TO OBTAIN THE WARRANTY THE PURCHASE RECEIPT MUST BE RETURNED 
WITH THE MACHINE. 

THE GUARANTEE EXCLUDES: 

DAMAGE, MALFUNCTION OR FAILURE DUE TO NEGLECT, MISUSE OR
ABUSE

DAMAGE MALFUNCTION OR FAILURE DUE TO USE IN CONTINUOUS
AND/OR HEAVY INDUSTRIAL APPLICATIONS.

DAMAGE, MALFUNCTION OR FAILURE DUE TO USE IN APPLICATIONS
THAT THE MACHINE IS NOT DESIGNED TO PERFORM.

CONSUMABLE COMPONENTS AND ACCESSORIES.

REPAIRS, MODIFICATIONS, OR ALTERATIONS ATTEMPTED OR MADE
TO THE MACHINE BY OTHER THAN AN AUTHORISED AGENT.

Sales and Service Enquirys 

www.expleco.com

    tel. +64 3 5729105   fax + 64 3 5729560. 

© 

This Instruction Manual is subject to copyright and must not be reproduced, copied or otherwise used

in 

any

 way or for any purpose without the consent in writing of Expleco Limited 

Summary of Contents for Oppressor GLC











Reviews: