7
2.2.5
Antenna and Antenna socket
The antenna is used to receive data. During use it is connected to the antenna socket (BNC-socket) of
the WAV-Player. You should prevent jamming the antenna or damaging it in any other way, even
when not in use and just storing the device.
During use, make sure the antenna is firmly mounted and upright.
You may also use a magnetic antenna, which should be placed on a metallic surface.
2.2.6
On and Off switch
By use of this Wip switch, the Player can be turned on or off. "O" = OFF, "I" = ON. Do not forget to
turn the device off after use, since the battery may deep discharge otherwise.
2.2.7
Charging socket
The 3 pole female socket is used to charge the device with a fitting charger. The device itself must
not be switched on during charging.
Furthermore, the device can be supplied with an external power supply hooked up to this socket. The
external supply uses Pin 2 (Plus) and Pin (1). The source should not exceed 12VDC, since the device
may be damaged otherwise.
2.2.8
Audio-output
Symmetrical Audio output. XLR 3 pole L and R, can be bridged to asymmetrical.
Summary of Contents for RX-WAV-Player
Page 5: ...5 ...
