11
2.2.1.3 MODE
Allows you to manually put the receiver into Test / Armed / Sleep Mode.
2.2.1.4 SHOW AUTOSHOW
Shows the number on ignition lines of the Autoshow saved onto the receiver. You can also view and
check every single line.
2.2.1.5 RADIO PROG
Allows you to set whether the receiver should receiver transmitter signals for an automatic entry into
its devicelist. Is it set to OFF, it can't be automaticall added.
Further, the ability to send show files via radio to the receiver is locked as well.
2.2.1.6 BATTERY
Allows you to set whether the device uses a NiMH-battery (NiMH) or an internal lead-acid-battery
(Pb)..
2.2.1.7 DELAY
Here you can set the distance of the sounds origin from the audience. The RX2-Wave Player will then
calculate the neccessary delay by the speed of sound, that is needed for the audience to hear the
music synchronous to the fireworks.
2.2.1.8 CH SETTINGS
MAIN BOX
Allows you to set the boxnumber (Main Box, from 1-99) that will control the RX2-Wave Player.
CH-CONTROL
Allows you to set which channelnumbers access special functions of the Player.
The following special functions can be started with the following channels:
Special channels RX2-Wave-Player
61
Play / Pause Track
62
Stop (Track time will be set to 0)
63
Previous track will be started
64
Next track will be started
65
Reset (Track time will be set to 0, and the Player is set to track 01)
66
A timer is started and shown on the display
