•
Before installation, please insert the Memory card in TF slot and format the memory card
prior to use
•
Install the front camera over the rearview mirror and attach it with the rubber bands,
adjust its position and lens angle in accordance with your needs and to ensure clear
vision
•
Connect the power adapter to the 12V cigarette lighter socket and route the cable in the
interior/ hide the excess cable into the interior panel and gaps to obtain visual aesthetics
•
It is recommended to connect rearview camera above the license plate; this might
require drilling 2 holes and attaching with the screws from the kit
•
Connect RED cable to the positive lead of the reverse light wires (cords that connect
your car’s tail lights to the dashboard) IMPORTANT NOTE: This might require a little
knowledge of car electronics, in case you are not sure how to properly set it up, it is
highly recommended to seek professional help, such as car electrician.
•
Route the rear cam cable to the front of the car and connect it to the main unit
•
After the installation is completed, please turn the unit ON by pressing the Power button
located on the bottom of the Front- mirror Dash Cam and start the engine
KEY BUTTONS/ TOUCH SCREEN FUNCTIONS DESCRIPTION
1. USB port
2. AVIN
3. SD card slot
4. GPS port
5. Reset
6. Power button
