WATER FILTER
WATER FILTER SYSTEM
CARVER CRYSTAL 3 FILTER SYSTEM
The Carver Crystal 3 Filter is designed to bring
water into your caravan in a convenient and
efficient manner. The system includes a special
two-stage filter which removes unpleasant
tastes, smells and colouring to give clear, fresh
tasting water.
The first stage is a filter screen which retains
small solids. The second stage is a bed of
silverised activated carbon, which removes
chlorine tastes and smells, etc. This is done by
absorption and by mechanical filtration
reducing algae and bacteria. Bacteria retained
are then destroyed by the silver content. This
action also prevents bacteriological growth in
the filter.
The Carver pump is detached from the crystal
housing for security and whilst touring.
CHANGING THE FILTER CARTRIDGE
When inserting a new filter cartridge into the
housing, smear vegetable oil on the two ‘O’
rings. (This reduces friction and makes it easier
to remove.)
It is recommended that the filter cartridge is
replaced after 30 days of use.
To remove the fiter cartridge, pull the tab on the
bottom of the filter, which will release the filter
from the housing
(see diagram).
Always ensure that the new filter cartridge is
pushed fully home into the housing.
STERILISING
When cleaning the water system at the start of
the season it is recommended that a new filter
cartridge is fitted.
WINTER USE
If caravanning in the winter there is a possibility
that the water in the outside container will
freeze, therefore please discuss with your
retailer the fitting of a winterisation kit.
CARVER COMPACT
On the Compact Water Filter System Housing,
raise the lid, clean both the water socket and
the plug of the pump assembly. Plug the pump
assembly into the socket. Turn the top security
clip anti-clockwise and the bottom security
clip clockwise to lock the plug in place.
Place the pump into the water container,
ensuring that it is fully submerged before
operating the system. A dust cover is available
to stop contaminants falling into the water.
DO NOT REMOVE BY PULLING THE HOSE
OR ELECTRIC CABLE.
HOW TO USE A WATERLINE WITH THE
INBOARD WATER TANK.
1. Place the pump switch on the control
panel to the 0 position.
2. Place tap next to the tank into the centre
position. See diagram below.
3. Connect waterline to water inlet on side of
caravan.
4. Turn on waterline
5. While the waterline is in use the pump
switch on the control panel must remain in
the 0 position.
6. Ensure that you return the tap next to the
tank to the inline position when you wish
to return to using the inboard tank.
35
Pipe
Pipe
Tap
Summary of Contents for 2003 Tourers
